NETGEAR RH348 Default Password

Looking for the NETGEAR RH348 default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the RH348 default password.

However, when you're troubleshooting a network problem and need to get in to the device, the RH348 default password suddenly becomes very important.

For most versions of the NETGEAR RH348, the default password is 1234.

In addition to the RH348 default password, you can also see the RH348 default username and RH348 default IP address in the table below.

Note: The NETGEAR RH348 default password may be different for certain hardware or firmware versions.

If I have that information, I'll include the exact RH348 version number along with the correct default password. You can usually find your NETGEAR RH348 version number on the bottom of the router.

Be sure to change the default router password on your RH348 to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new RH348 password.

Help! The RH348 Default Password Doesn't Work!

At some point during the life of your particular NETGEAR RH348, the default password, username, and/or IP address might have been changed.

In most cases, if the NETGEAR RH348 default IP address has been changed, the new IP address for the RH348 will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the RH348 default password or RH348 default username has changed, you'll need to reset the NETGEAR RH348 to factory defaults. You can usually do that via a special button or sequence of actions.

The RH348 manual will have specific directions for performing a factory default reset. You can download the manual for the RH348 from NETGEAR Support.

Please let me know if any of the RH348 default login data below needs updated. For other questions about the RH348 default information on this page, see my Default Password FAQ.

RH348 Default Password & Other Default Login Data

[1] The RH348 router can only be configured via Telnet. No web-based administration is available.