1. Technology
You can opt-out at any time. Please refer to our privacy policy for contact information.

Cisco WRVS4400N Default Password

WRVS4400N Default Password & Other Default Login Info


Linksys wrvs4400n router

Looking for the Cisco WRVS4400N default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRVS4400N default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRVS4400N default password suddenly becomes very important.

For most versions of the Cisco WRVS4400N, the default password is admin. As with most passwords, the WRVS4400N default password is case sensitive.

In addition to the WRVS4400N default password, you can also see the WRVS4400N default username and WRVS4400N default IP address in the table below.

Note: The Cisco WRVS4400N default password may be different for certain hardware or firmware versions.

If I have that information, I'll include the exact WRVS4400N version number along with the correct default password. You can usually find your Cisco WRVS4400N version number on the bottom of the router.

Be sure to change the default router password on your WRVS4400N to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRVS4400N password.

Help! The WRVS4400N Default Password Doesn't Work!

At some point during the life of your particular Cisco WRVS4400N, the default password, username, and/or IP address might have been changed.

In most cases, if the Cisco WRVS4400N default IP address has been changed, the new IP address for the WRVS4400N will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRVS4400N default password or WRVS4400N default username has changed, you'll need to reset the Cisco WRVS4400N to factory defaults. You can usually do that via a special button or sequence of actions.

The WRVS4400N manual will have specific directions for performing a factory default reset. You can download the manual for the WRVS4400N from Cisco Support.

Please let me know if any of the WRVS4400N default login data below needs updated. For other questions about the WRVS4400N default information on this page, see my Default Password FAQ.

WRVS4400N Default Password & Other Default Login Data

Version Default Username Default Password Default IP Privileges
All admin admin Administrator

©2014 About.com. All rights reserved.