1. Technology
Send to a Friend via Email
You can opt-out at any time. Please refer to our privacy policy for contact information.

Cisco RVS4000 Default Password

RVS4000 Default Password & Other Default Login Info


Looking for the Cisco RVS4000 default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the RVS4000 default password.

However, when you're troubleshooting a network problem and need to get in to the device, the RVS4000 default password suddenly becomes very important.

For most versions of the Cisco RVS4000, the default password is admin. As with most passwords, the RVS4000 default password is case sensitive.

In addition to the RVS4000 default password, you can also see the RVS4000 default username and RVS4000 default IP address in the table below.

Note: The Cisco RVS4000 default password may be different for certain hardware or firmware versions.

If I have that information, I'll include the exact RVS4000 version number along with the correct default password. You can usually find your Cisco RVS4000 version number on the bottom of the router.

Be sure to change the default router password on your RVS4000 to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new RVS4000 password.

Help! The RVS4000 Default Password Doesn't Work!

At some point during the life of your particular Cisco RVS4000, the default password, username, and/or IP address might have been changed.

In most cases, if the Cisco RVS4000 default IP address has been changed, the new IP address for the RVS4000 will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the RVS4000 default password or RVS4000 default username has changed, you'll need to reset the Cisco RVS4000 to factory defaults. You can usually do that via a special button or sequence of actions.

The RVS4000 manual will have specific directions for performing a factory default reset. You can download the manual for the RVS4000 from Cisco Support.

Please let me know if any of the RVS4000 default login data below needs updated. For other questions about the RVS4000 default information on this page, see my Default Password FAQ.

RVS4000 Default Password & Other Default Login Data

Version Default Username Default Password Default IP Privileges
All admin admin Administrator

©2014 About.com. All rights reserved.