1. Technology
You can opt-out at any time. Please refer to our privacy policy for contact information.

Linksys WRT110 Default Password

WRT110 Default Password & Other Default Login Info

By

Looking for the Linksys WRT110 default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRT110 default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRT110 default password suddenly becomes very important.

For most versions of the Linksys WRT110, the default password is admin. As with most passwords, the WRT110 default password is case sensitive.

In addition to the WRT110 default password, you can also see the WRT110 default username and WRT110 default IP address in the table below.

Note: The Linksys WRT110 default password may be different for certain hardware or firmware versions.

If I have that information, I'll include the exact WRT110 version number along with the correct default password. You can usually find your Linksys WRT110 version number on the bottom of the router.

Be sure to change the default router password on your WRT110 to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRT110 password.

Help! The WRT110 Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys WRT110, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys WRT110 default IP address has been changed, the new IP address for the WRT110 will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRT110 default password or WRT110 default username has changed, you'll need to reset the Linksys WRT110 to factory defaults. You can usually do that via a special button or sequence of actions.

The WRT110 manual will have specific directions for performing a factory default reset. You can download the manual for the WRT110 from Linksys Support.

Please let me know if any of the WRT110 default login data below needs updated. For other questions about the WRT110 default information on this page, see my Default Password FAQ.

WRT110 Default Password & Other Default Login Data

Version Default Username Default Password Default IP Privileges
All [none] admin 192.168.1.1 Administrator

©2014 About.com. All rights reserved.