1. Technology
You can opt-out at any time. Please refer to our privacy policy for contact information.

Linksys BEFW11S4 Default Password

BEFW11S4 Default Password & Other Default Login Info

By

Linksys befw11s4 router
Linksys

Looking for the Linksys BEFW11S4 default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the BEFW11S4 default password.

However, when you're troubleshooting a network problem and need to get in to the device, the BEFW11S4 default password suddenly becomes very important.

For most versions of the Linksys BEFW11S4, the default password is admin. As with most passwords, the BEFW11S4 default password is case sensitive.

In addition to the BEFW11S4 default password, you can also see the BEFW11S4 default username and BEFW11S4 default IP address in the table below.

Note: The Linksys BEFW11S4 default password may be different for certain hardware or firmware versions.

If I have that information, I'll include the exact BEFW11S4 version number along with the correct default password. You can usually find your Linksys BEFW11S4 version number on the bottom of the router.

Be sure to change the default router password on your BEFW11S4 to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new BEFW11S4 password.

Help! The BEFW11S4 Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys BEFW11S4, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys BEFW11S4 default IP address has been changed, the new IP address for the BEFW11S4 will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the BEFW11S4 default password or BEFW11S4 default username has changed, you'll need to reset the Linksys BEFW11S4 to factory defaults. You can usually do that via a special button or sequence of actions.

The BEFW11S4 manual will have specific directions for performing a factory default reset. You can download the manual for the BEFW11S4 from Linksys Support.

Please let me know if any of the BEFW11S4 default login data below needs updated. For other questions about the BEFW11S4 default information on this page, see my Default Password FAQ.

BEFW11S4 Default Password & Other Default Login Data

Version Default Username Default Password Default IP Privileges
All [none] admin 192.168.1.1 Administrator

©2014 About.com. All rights reserved.