Device Manager error codes are special error codes, accompanied by error messages, that are reported in Device Manager
Error codes in Device Manager are generated when the computer is experiencing device driver issues, system resource conflicts, or other hardware problems.
Note: Device Manager error codes are completely different than system error codes even though some of the code numbers may be the same. If you see an error code outside of Device Manager, it's not a Device Manager error code.
See below for a complete list of Device Manager error codes:
Code 24
This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)The drivers for this device are not installed. (Code 28)
Code 29
This device is disabled because the firmware of the device did not give it the required resources. (Code 29)This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Code 32
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)Code 33
Windows cannot determine which resources are required for this device. (Code 33)Code 34
Windows cannot determine the settings for this device. Consult the documentation that came with this device and use the Resource tab to set the configuration. (Code 34)Code 35
Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35)Code 36
This device is requesting a PCI interrupt but is configured for an ISA interrupt (or vice versa). Please use the computer's system setup program to reconfigure the interrupt for this device. (Code 36)Code 37
Windows cannot initialize the device driver for this hardware. (Code 37)
