Error Code 630
System error code 630 means "{EXCEPTION} Multiple floating point faults." This error code may also display as "ERROR_FLOAT_MULTIPLE_FAULTS" or as the value 0x276.Error Code 631
System error code 631 means "{EXCEPTION} Multiple floating point traps." This error code may also display as "ERROR_FLOAT_MULTIPLE_TRAPS" or as the value 0x277.Error Code 632
System error code 632 means "The requested interface is not supported." This error code may also display as "ERROR_NOINTERFACE" or as the value 0x278.Error Code 633
System error code 633 means "{System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode." This error code may also display as "ERROR_DRIVER_FAILED_SLEEP" or as the value 0x279.Error Code 634
System error code 634 means "The system file %1 has become corrupt and has been replaced." This error code may also display as "ERROR_CORRUPT_SYSTEM_FILE" or as the value 0x27A.Error Code 635
System error code 635 means "{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process" This error code may also display as "ERROR_COMMITMENT_MINIMUM" or as the value 0x27B.Error Code 636
System error code 636 means "A device was removed so enumeration must be restarted." This error code may also display as "ERROR_PNP_RESTART_ENUMERATION" or as the value 0x27C.Error Code 637
System error code 637 means "{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down." This error code may also display as "ERROR_SYSTEM_IMAGE_BAD_SIGNATURE" or as the value 0x27D.Error Code 638
System error code 638 means "Device will not start without a reboot." This error code may also display as "ERROR_PNP_REBOOT_REQUIRED" or as the value 0x27E.Error Code 639
System error code 639 means "There is not enough power to complete the requested operation." This error code may also display as "ERROR_INSUFFICIENT_POWER" or as the value 0x27F.
