1. Technology
You can opt-out at any time. Please refer to our privacy policy for contact information.

Cisco SRW224G4P Default Password

SRW224G4P Default Password & Other Default Login Info


Looking for the Cisco SRW224G4P default password? You probably have little reason to access your switch on a regular basis so don't feel too bad if you've forgotten the SRW224G4P default password.

However, when you're troubleshooting a network problem and need to get in to the device, the SRW224G4P default password suddenly becomes very important.

For most versions of the Cisco SRW224G4P, the default password is [none]. In other words, there is no SRW224G4P default password and you should leave the field blank when asked for a password.

In addition to the SRW224G4P default password, you can also see the SRW224G4P default username and SRW224G4P default IP address in the table below.

Note: The Cisco SRW224G4P default password may be different for certain hardware or firmware versions.

If I have that information, I'll include the exact SRW224G4P version number along with the correct default password. You can usually find your Cisco SRW224G4P version number on the bottom of the switch.

Be sure to change the default switch password on your SRW224G4P to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new SRW224G4P password.

Help! The SRW224G4P Default Password Doesn't Work!

At some point during the life of your particular Cisco SRW224G4P, the default password, username, and/or IP address might have been changed.

For most networks, if the Cisco SRW224G4P default IP address has been changed, the new IP address for the SRW224G4P switch can be determined using tracert, a command available from the Command Prompt in Windows.

See How To Identify Network Hardware IP Addresses on a Local Network if you need help using tracert to find the SRW224G4P default IP address.

In situations where the SRW224G4P default password or SRW224G4P default username has changed, you'll need to reset the Cisco SRW224G4P to factory defaults. You can usually do that via a special button or sequence of actions.

The SRW224G4P manual will have specific directions for performing a factory default reset. You can download the manual for the SRW224G4P from Cisco Support.

Please let me know if any of the SRW224G4P default login data below needs updated. For other questions about the SRW224G4P default information on this page, see my Default Password FAQ.

SRW224G4P Default Password & Other Default Login Data

Version Default Username Default Password Default IP Privileges
All admin [none] Administrator

©2014 About.com. All rights reserved.