Looking for the Cisco SRW208MP default password? You probably have little reason to access your switch on a regular basis so don't feel too bad if you've forgotten the SRW208MP default password.
However, when you're troubleshooting a network problem and need to get in to the device, the SRW208MP default password suddenly becomes very important.
For most versions of the Cisco SRW208MP, the default password is [none]. In other words, there is no SRW208MP default password and you should leave the field blank when asked for a password.
In addition to the SRW208MP default password, you can also see the SRW208MP default username and SRW208MP default IP address in the table below.
If I have that information, I'll include the exact SRW208MP version number along with the correct default password. You can usually find your Cisco SRW208MP version number on the bottom of the switch.
Help! The SRW208MP Default Password Doesn't Work!
At some point during the life of your particular Cisco SRW208MP, the default password, username, and/or IP address might have been changed.
For most networks, if the Cisco SRW208MP default IP address has been changed, the new IP address for the SRW208MP switch can be determined using tracert, a command available from the Command Prompt in Windows.
See How To Identify Network Hardware IP Addresses on a Local Network if you need help using tracert to find the SRW208MP default IP address.
In situations where the SRW208MP default password or SRW208MP default username has changed, you'll need to reset the Cisco SRW208MP to factory defaults. You can usually do that via a special button or sequence of actions.
The SRW208MP manual will have specific directions for performing a factory default reset. You can download the manual for the SRW208MP from Cisco Support.
SRW208MP Default Password & Other Default Login Data
|Version||Default Username||Default Password||Default IP||Privileges|